What Is the Major Difference Between Preventive and Corrective Maintenance?

Preventive vs Corrective

Embarking on the quest for impeccable asset management, organizations encounter a pivotal crossroads defined by the choices between preventive and corrective strategies. In the dynamic landscape of Asset Infinity, this blog unravels the intricacies of these two fundamental approaches, dissecting their nuances and synergies. As we delve into the realm where foresight meets adaptability, join us in exploring how the strategic deployment of preventive and corrective maintenance becomes the compass guiding assets towards peak performance. Welcome to a discourse that transcends mere management—here, we navigate the pathways to efficiency, resilience, and sustained success in the world of asset optimization.

 What Is Preventive Maintenance?

Preventive maintenance is one of the most used asset maintenance types. It is helpful in avoiding certain asset equipment failures. Decreases downtime of an asset and optimizes asset performance.

In preventive maintenance strategy, as it schedules maintenance proactively and before asset failure can occur maintenance is provided. It also keeps records of the past such as asset history, asset inspection & asset service, etc.

Usually, a big size organization has lots of assets and equipment so it can become complex to implement and maintain.

Therefore, it is essential to utilize preventive maintenance software that automates the maintenance process and organizes the process effectively.

What Are the Features of Preventive Maintenance Software?

Features of preventive maintenance software are discussed below:

1. Schedule Maintenance

Lots of organizations do not pay attention to their assets and as a result, the chances of asset breakdown are more than usual. However, preventive maintenance software can help you avoid such events.

2. Tracking Maintenance

This software enables organizations to schedule, and track asset maintenance easily & effectively. This software is beneficial especially when they have lots of assets and equipment in terms of tracking and scheduling asset maintenance.

3. Work Order Creation

Simple and effective in creating work orders for each maintenance. Moreover, it keeps everyone on the same page and information centralized as well so that the maintenance manager knows which technician is working on which work order.

4. Create a Checklist

Lots of times it has been seen that the maintenance technician forgot some of the activities. That is why it is important to create a checklist for each maintenance work order so that no work is skipped.

It is also helpful for maintenance technicians to deliver more efficient work and enhance productivity as well.

Recommend To Read: What Are the Important Functions of Preventive Maintenance?

What Are the Pros and Cons of Preventive Maintenance?

Pros of Preventive Maintenance Are:

1. Extend Asset Life

When equipment gets maintenance on the time it leads to asset life optimization and asset performance improves in the long term.

2. Reduces Downtime

In the long run, asset downtime is decreased and uptime is increased. It results in better productivity.

3. Better Safety

Since sudden asset failures are minimized then it creates a safe environment for employees and assets themselves. It leads to better asset performance as well.

Cons of Preventive Maintenance Are:

1. Labor Intensive

Preventive maintenance is labor-intensive since there are lots of assets and keeping them maintained is a hard task. So, the maintenance team always has some assets in the queue for maintenance.

2. Expensive at the Beginning

When you implement preventive maintenance initially it might seem expensive because lots of assets will require lots of spare parts and repairing and labor expenses will increase as well.

3. Over Maintenance

Sometimes assets are not used much! As a result, they are given over maintenance, so it is a disadvantage. Therefore, keeping track of maintenance & asset utilization is essential to avoid this issue.

What Is Corrective Maintenance?

Corrective maintenance is maintenance in which an asset is brought back into running condition. Usually, corrective maintenance is unplanned maintenance. It is used when a sudden equipment failure has occurred.

However, corrective maintenance can be planned or unplanned maintenance. In this process, several activities are conducted, such as repairing, replacing, restoring equipment, adjustment, realignment, troubleshooting, etc.

Corrective maintenance can be done when a technician finds a potential problem while performing maintenance or inspecting an asset. Corrective maintenance can also be done when sudden equipment failure occurs.

Missed To Read: Best Practices for Issue Tracking Software to Boost Corrective Maintenance.

What Are the Pros and Cons of Corrective Maintenance?  

Pros of corrective maintenance are discussed below:

1. Almost No Planning Required

In corrective maintenance, no planning is required because problems are not found in advance, and maintenance is done right away.  

2. Simplified Procedure

The process of corrective maintenance is simple because it is only done when it is needed, and the maintenance team can focus on other activities.

3. Lower Maintenance Expenses for the Short Term

Proactive maintenance requires proper planning which can be expensive but corrective maintenance does not require advance planning. So, it is cost-effective in the short term.

Cons of corrective maintenance are discussed below:

1. Costly in the long run

When sudden equipment failure frequency increases then maintenance cost increases at the same time labor expenses increases as well.

2. Performance issue

Equipment is not given proper maintenance and that impacts the performance of assets. You cannot expect high performance with corrective maintenance implementation.

3. More chances of breakdown

Since corrective maintenance only rectifies the main issue but not the cause that equipment failure frequency is more.

Also Read: What Are the Challenges Faced While Implementing Condition-Based Maintenance?

How Are Preventive Maintenance and Corrective Maintenance Different from Each Other?  

Below we have discussed the differences between preventive maintenance and corrective maintenance:

1. Corrective maintenance is reactive by nature whereas preventive maintenance is proactive in nature.

2. Preventive maintenance is more complex, and planning is required whereas corrective maintenance is less complex, and no planning is required.

3. Corrective maintenance is done after sudden asset failure and preventive maintenance avoids sudden failure.

4. Preventive maintenance is expensive in the initial stage but cost-effective in the long term. Whereas corrective maintenance is cost-effective in the beginning but expensive in the long term.

5. The frequency of maintenance is more in corrective maintenance whereas the frequency of maintenance is less in Preventive maintenance.

6. Preventive maintenance leads to enhanced asset life Corrective maintenance leads to decreases asset life.

7. Performance is optimized in Preventive maintenance whereas Performance is decreased in corrective maintenance.


In the realm of asset management, the journey is often defined by the strategic choices between preventive and corrective measures. As we conclude this exploration on Asset Infinity, it becomes evident that the distinction between preventive and corrective maintenance is not merely a matter of choice but a strategic decision that shapes the destiny of your assets.

Preventive maintenance stands as the guardian at the gates, a proactive shield against the impending threats of wear, tear, and unexpected breakdowns. It embodies a forward-thinking approach, ensuring the longevity and reliability of assets, minimizing downtime, and safeguarding the bottom line.

On the flip side, corrective maintenance emerges as there silient knight, ready to confront challenges head-on when unforeseen issues arise. It embodies adaptability and resourcefulness, swiftly addressing problems to restore assets to their optimal state and maintain operational continuity.

At Asset Infinity, we recognize that the synergy between preventive and corrective measures is the key to unlocking the full potential of your asset management strategy. Our platform is designed not only to facilitate the seamless integration of these approaches but also to empower you with real-time insights, actionable data, and a comprehensive toolkit for decision-making.

Whether you choose to proactively extend the lifespan of your assets through preventive maintenance or respond dynamically to challenges with corrective measures, Asset Infinity is your trusted ally in this transformative journey. Together, let's redefine asset management, ensuring that each asset becomes a beacon of reliability, resilience, and efficiency in your organizational landscape. Embrace the power of preventive and corrective strategies with Asset Infinity, where your assets are not just managed—they are optimized for enduring success.

Frequently Asked Questions (FAQs)

Q.1  - What Are the Various Types of Maintenance Organizations Can Utilize?

Mainly there are two types of maintenance, proactive and reactive maintenance. In corrective maintenance, several maintenance tasks are available, such as preventive and predictive maintenance, condition monitoring maintenance, etc. Whereas in reactive maintenance there is emergency maintenance, corrective maintenance, etc.

Q.2 - What Are the Key Features of Corrective Maintenance?

A few key features of corrective maintenance are discussed below:

1. Creates work order.

2. Reduces time wastage.

3. Alert maintenance team.

Q.3 - Are Predictive and Preventive Maintenance the Same?

No, they are not the same Predictive and preventive maintenance are different from each other. Although most of the features are the same. As we know, preventive maintenance is scheduled maintenance. It is done based on asset utilization or after a specific time (1 week, 1 month, and so on). Whereas in predictive maintenance, the anticipation of asset failure is calculated. For this purpose, data is utilized, and asset inspection is done. regularly. According to the Globe News Wire, “The global predictive maintenance market held a market value of USD 4,029.4 Million in 2020 and is projected to reach USD 18,653.2 Million by the year 2027. The market is anticipated to grow at a CAGR of 26.5% from 2021 to 2027.

Related Posts